@BobKramer wrote:
I have downloaded and installed the program today. Went to the stand alone version and tried to open an image. It spins for a few minutes and then states there's a problem and the software needs to shut down. I think my graphic card should work with this and I have Windows 7 pro.. Hope this is the correct info needed for solving the problem:
Card name: NVIDIA Quadro FX 1700
Manufacturer: NVIDIA
Chip type: Quadro FX 1700
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_040F&SUBSYS_049A10DE&REV_A1
Display Memory: 4071 MB
Dedicated Memory: 487 MB
Shared Memory: 3583 MB
Current Mode: 1920 x 1200 (32 bit) (59Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: LCD2690WUXi
Monitor Id: NEC66CB
Native Mode: 1920 x 1200(p) (59.950Hz)
Output Type: DVI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 9.18.0013.4066 (English)
Driver Version: 9.18.13.4066
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 8/4/2014 11:17:49, 17562848 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71E3E-474F-11CF-8C7C-97241CC2C435}
Vendor ID: 0x10DE
Device ID: 0x040F
SubSys ID: 0x049A10DE
Revision ID: 0x00A1
Driver Strong Name: oem13.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section010:9.18.13.4066:pci\ven_10de&dev_040f
Rank Of Driver: 00E02001
Posts: 9
Participants: 3